Tuesday, August 21, 2012

Old Dogs Motorcycle trip: Skyline Drive

I was contacted by a couple of my old cronies (We weren't old when we first met in the early 80's), about a possible trip down skyline drive on the second weekend of September 2012. I wasn't sure I could be ready to do the trip as Kari and I will be in Florida the previous weekend and I don't get home until the 6th, my birthday. As well I'd planned an extended photo trip for those weeks in September.

I've been wanting to get out to Montana, don't ask me why, it calls to me. I would love to do it on the bike, but being a responsible, sensible adult, I knew I'd have a hard time making that work. I have to face facts, when I drive to Florida, 1100 miles; I split the trip into 600 and 500 mile days, and I'm still beat after two days. The trip to Montana, for arguments sake is twice that. Even if I was able to make the same mileage, I would be almost five days out. Then I would have to shoot some pictures and turn around and come back. In a car, I thought I might be able to do at least 1000 miles the first day, leaving very early in the morning and driving at least 12 hours. Cooler heads have prevailed and for now an extended bike trip is on the shelf.

Even this trip through Skyline Drive can be a little daunting for me on my bike. The problem is I have a cruiser. Apparently in motorcycle manufacturing terms that means "cruise around the gas station and fill the tanks up again"! My fuel tank is only 4.1 gallons. My best consumption has been 44mpg. I like to calculate on 40mpg. I go on reserve at about 3 gallons, making my cruising distance about 120 miles.

Kurt has a Goldwing, I know the tank is larger. Kurt said he went to his house in Cape May non-stop; google says it's about 3.5 hours, 168 miles (pretty good moving). Chris, I believe, still has a beemer, which is known to have a large tank. The key is that both their bikes are alot more touring than mine. I know I'll have to stop for gas every two hours.

The trip to skyline drive, actually Front Royal Va, from Annapolis is 134 miles using route 70 to Frederick and then down 340. This is actually about 30 miles longer than if I cut through DC. I hate driving DC anytime, so that's out. From front Royal to Skyland is another 36 miles. For a total of 170 miles. Actually, that's not too bad. That's close to the mileage from the Autotrain station in Sanford Fl to our house in Juno Beach. This actually comes as a surprise to me. I thought Chris posted that it was another 1.5 hours from Front Royal to Skyland, about 100 miles. It's only 36 miles of easy slow riding.





Annapolis to Skyland Virginia

Driving directions to Skyland Resort
Via Reichs Ford Rd - remove

910 Monroe St
Annapolis, MD 21403

1. Head east on Monroe St toward Bay Ridge Ave

207 ft
2. Turn right onto Bay Ridge Ave

0.3 mi
3. Take the 3rd right onto Tyler Ave

0.3 mi
4. Continue onto Hilltop Ln

1.3 mi
5. Turn right onto Forest Dr

0.6 mi
6. Continue onto MD-665 W/Aris T Allen Blvd
Continue to follow MD-665 W

1.8 mi
7. Keep left at the fork, follow signs for I-97 N/U.A. 50 W/US-301 S/Washington/Baltimore

1.1 mi
8. Keep right at the fork and merge onto I-97 N

13.5 mi
9. Take exit 14B to merge onto MD-100 W toward Ellicott City

14.0 mi
10. Take the exit onto US-29 N toward I-70

3.3 mi
11. Take exit 25B to merge onto I-70 W toward Frederick

32.2 mi
12. Take the exit toward Monocacy Blvd

0.1 mi
13. Turn left onto Monocacy Blvd

0.2 mi
14. Turn left onto E South St

0.1 mi
15. Continue onto Reichs Ford Rd

0.5 mi
16. Turn left onto Ray Smith Rd

161 ft
17. Take the 1st right toward Reichs Ford Rd

217 ft
18. Turn right onto Reichs Ford Rd

0.5 mi
19. Continue onto E South St

0.1 mi
20. Turn right onto Monocacy Blvd

0.2 mi
21. Merge onto I-70 W/US-40 W via the ramp to I-270
Continue to follow I-70 W

2.4 mi
22. Take exit 52 to merge onto US-15 S/US-340 W
Continue to follow US-340 W
Passing through Virginia
Entering West Virginia

24.4 mi
23. Merge onto US-340 S/W Virginia 9 E via the ramp to Berryville/Leesburg
Continue to follow US-340 S
Entering Virginia

25.8 mi
24. Turn left onto US-340 S/US-522 S/Stonewall Jackson Hwy
Continue to follow US-340 S/US-522 S

9.4 mi
25. Turn left onto W 14th St

0.2 mi
26. Continue onto N Royal Ave

1.2 mi
27. Turn right onto W Main St

249 ft
134 mi – about 2 hours 37 mins

Front Royal, VA

28. Head east on W Main St toward N Royal Ave

249 ft
29. Take the 1st right onto S Royal Ave

0.4 mi
30. Turn left onto South St

0.5 mi
31. Turn right onto US-522 S/Remount Rd
Continue to follow US-522 S

14.8 mi
32. Turn right onto US-211 W/US-522 S/Lee Hwy
Continue to follow US-211 W/Lee Hwy

15.1 mi
33. Take the exit toward Skyline Dr

0.2 mi
34. Keep left at the fork and merge onto Skyline Dr
This road may be seasonally closed
Destination will be on the left

5.4 mi
36.5 mi – about 48 mins














Sunday, July 29, 2012

Changed the oil in the Sabre with Penzoil 10-40 Mileage 42,449


Some times it the small things that can be a real pain. I bought the Sabre VT1100 (the running bike)  in February 2012 and took it to Florida on the Autotrain. The ride from the station to Juno Beach is about 180 miles. I road it to Okeechobee and around Jupiter a few times. I brought it home to Annapolis in May.


While in Florida I noticed that the oil seemed a little low. I bought some oil and ended up over filling it a little; which of course meant I had to drain some oil. The bolt is a 17mm bolt, no problem, I have 17mm wrenches and sockets. However, because the bike only sits on a side stand there is very little clearance for a full size wrench and a socket is blocked by a radiator hose.

The bolt had been bunged up by previous owners, I didn't help it any in Florida. When I got home in May I ordered a new bolt, but had never gotten around to changing the oil. I drained the oil yesterday and when I put the new bolt in I had the same problem, no clearance under the bike for a standard size wrench.

I won't go into great detail about the bad website and customer service at home depot. Suffice it to say that Homedespot shows one price on line and charges another in the store. The Manager Brian woudn't modify the price so I returned my $35 wrench purchases and went to my favorite tool store, Harbor Freight tools.

Unfortunately, their pack of stubby wrenches only went up to 16mm. I ended up buying as set of S shaped obstruction wrenches and a set of Offset wrenches each for $15. I picked up a couple of other items for a total bill of $40. You lose HomeDespot!



Pittsburgh 99699 5 Piece Metric S-Type Wrench Set

Pittsburgh 32042 8 Piece Metric Offset Box Wrench Set




On my way home I decided to stop at Walmart, I thought I'd seen a stubby set there. They didn't have a stubby set but they did have a short set of wrenches for $7.88 which did include a 17mm wrench just slightly over 6" long. That one was the one that did it. They may be as cheap as you can get, but in this case they were the the ones that work. I may even grind the one end off the 17mm to put it in the Sabre tool kit (Which reminds me the Honda uses the same 18mm spark plug socket as the K. I need to get another one to carry on the Sabre.)


 Ultra Steel 9pc Metric Wrench Combo Set:



Ultra Steel 9pc Metric Wrench Combo Set





I tried the S wrenches since they had packaging that could be easily opened and closed, it didn't work, not enough swing. I didn't open the other pack to try because I want to return these.

While I do enjoy nice tools I don't find these to be in the keeper catagory. HFT did have their stubby ratchet set on sale for $27. They were out of the metric pack but I got a raincheck, they will be in on Thursday. I have many Gearwrench sets, having gone on a buying spree at Sears (another dirty word) a few years ago during their annual tool sale. These are fine wrenches. I think Gearwrench either bought or filed the original patent for the ratcheting wrench which seems to have either lapsed or has been sold to every major tool maker. I've since bought wrenches by Husky and now HFT as well as Craftsman. They all look to be high quality and work well. The HFT brand now carries a lifetime warranty like the rest. I see no sense in buying and paying for a name when the quality is the same or better for less money. Besides the little work I do with these wrenches shouldn't tax their strength.

I said I have many Gearwrench sets. I have a set of both metric and SAE for the boat. The engines are Detroit's, SAE. The generator is Northern Lights which is metric. I carry a set of double end Quad Box in both SAE and metric in my tool bag. This gives me 16 sizes in four wrenches, and they are reversible, the wrench never leaves the nut. I usually find that I go to the metrics more than the SAE, but for a little extra weight they are worth carrying.

GearWrench 2 pc. Standard Reversible Quad Box Set

http://s.shld.net/is/image/Sears/00944020000?hei=600&wid=600&op_sharpen=1&qlt=90,0&resMode=sharp&op_usm=0.9,0.5,0,0
The one tool kit that I find indespensible is a little Gearwrench Driver set. I carry one in my bag, and one for each of the motorcycles and boat. I've given these as thank you gifts. Until I started work on the beemer most jobs could be accomplished with this little kit. They used to go on sale at sears for $20 I think the price is now up to $29 and on sale for $25 which I think is still a deal. Buy a set, the only bad thing is the box, it's plastic and tends to break. I usually put my kit in a little bag of some sort.

GearWrench Micro-Driver Set 35 Pieces

http://s.shld.net/is/image/Sears/spin_prod_684409001?hei=600&wid=600&op_sharpen=1&qlt=90,0&resMode=sharp&op_usm=0.9,0.5,0,0

Product Description

A Gearwrench Wrench Set that Packs Fast and Travels Light
A solid companion for car or truck, the Gearwrench Microdriver set delivers a powerful grip that torques nuts, bolts, screws and more. Featuring a fine toothed ratcheting design and the ability to quickly swap between attachments, this set tightens and loosens 35 different fasteners, while fitting easily under the driver’s seat or in the glove box of any car or seat of any motorcycle.
Built with a reinforced ratchet mechanism, this set is tough enough to lean on and bust loose tough bolts, while being nimble enough to complete turns in spaces as tight as 6 degrees. So whether you’re swapping you bike’s oil at a roadside auto shop, or draining a water tank under your RV, this Gearwrench Wrench Set holds fasteners tight and makes every turn count. Toss one of these in your vehicle before you hit the road, and be ready.
  • Full Gearwrench Wrench Set Set includes: Square end 1/4 in. adapter, 5 piece inch socket set, 5 piece metric socket set, 18 ¼ in. driver bit set and 5 piece 5/16 in. driver bit set
  • Made from tough alloyed steel, this set is ready for tough torquing
  • Features chrome dipped tools for longer life and corrosion resistance
  • Driver bits are designed to hold fasteners tight, reducing slip and stripping
  • Blow molded carry case features slots for each tool delivering safe storage and easy access

The nice thing about this tool is that it's double ended, it can drive 1/4 inch sockets on one side and driver bits on the other. Each end is reversible. I've bought driver sockets for it and other add-ons, like a small extension and wobble U joint that fit in the little bin underneath making it more useful in more situations.

Athough you can buy it from Sears, you'll pay more and I don't like giving money to bad companies unless there's no other alternative. It's available from Amazon For $18.23 here:


http://www.amazon.com/GearWrench-85035-35-MicroDriver-Set/dp/B0062FSAVI


If you find another item to hit $25 bucks you can get free shipping.






















Thursday, March 22, 2012

After The Sabre

My Next Bike

Begun on 03.03.2012 Finished 03.20.2012


As is the case with many people, I may somewhat rush into my purchases. I looked fairly extensively for the purchase that became the sabre. The problem is the low seat height and the small gas tank. With a 4.6 gallon tank I’ve been getting about 40-44 miles per gallon. If an estimate of 40mpg and using 4 gallons, that’s a trip of 160 miles. Now my current riding style is to stop fairly often, I’m not 24 any more. That doesn’t mean that a 160 mile trip or roughly 3 hours is any thing to sneer about. The real problem comes when you want to head down that open road...once you get down there you have to get back! I experienced this concern on my first long ride from Sanford FL to Juno Beach. There would have been no problem if I’d taken the route suggested by the GPS, get to the nearest highway and then hop on 95 south. There would have been plenty of gas stations. However, I dislike highways and I had very little highway time. The last thing I wanted to do for two hundred miles is listen to an 18 wheeler on my left shoulder.

I instead opted for a slower more scenic route through the middle of Florida. Once I was past Orlando I hoped a two lane highway known as 441. It was pretty much a 60 mph road down the middle of Florida to Lake Okeechobee. From there I just made a left onto Indian town road, also a 60 mph road. This is my preferred type of road anyhow. But in doing this the question is raised, “what kind of gas mileage will I get if I have to travel on roads where the speed limit is 70 mph and it’s unsafe to go much less than that”? I won’t know the answer to that for some time yet. The bike is still in Florida and I don’t plan to bring it back until April.

The problem with the short seat height I think could be rectified by a couple of things. The first would be to raise the seat with a cushion of some sort. I’ve looked into air and gel seats. Crash or Highway bars with highway pegs would be another way of stretching my legs. However, there’s a logistical or at least storage problem. The bike has to fit in the garage in Florida in front of the car. Without crash bars it does fit on a dolly with very little room to spare. As a matter of fact it’s best to tilt up the right floor board and even then it digs into the wall a little bit. I’m afraid that with highway bars the bike might not fit into the space.

There are two other things that I think would enhance the ride of the bike. The first would be for a taller wind screen. I get quite a bit of breeze on my head and shoulders. The screen is as high as it can go and there is a fair amount of wind under the screen and above the headlight. The other thing would be to bring back the handle bars a little bit. With the foot controls where they are now and the handlebars in their current position I’m kind of in a wishbone shape, it’s not comfortable. Or as I said to the guy I work with over at Crofton Motor sports, “maybe I just didn’t notice the discomfort or care about it 30 years ago”. He responded, not unkindly with “well, you’re not 20 anymore”. So true. That’s why I have this wish list.

On to the next bike. Outside of winning the Lottery or having my stock portfolio zooming to unknown heights, each as remote as the other. I’m making plans for my next bike. With unlimited funds that bike would be a BMW touring bike, a Kawasaki Concours, or a Honda ST1300 or Goldwing 1800. The problem with the new bikes other than price is that like the US and Soviet Union during the cold war there has been an escalation of engine size to near car size. They don’t get good gas mileage. Some of these bike get worse mileage than a midsize sedan! Why hop on a bike and spend half your trip seeing every gas station on the way? Of course there’s the cost of that gas. At this time March 2012 the fear is that the greater part of the country will hit $5 per gallon during the summer. It would make more sense to travel in Kari’s Prius at 50mpg, or even my Camry at near 40mpg.

So in consideration I’m starting to compile a list of bikes that would meet my needs. Many Honda’s are high on the list. Honda makes a good product. They are often water cooled and shaft driven making them long lasting and low maintenance.


Honda Shadow Aero 750 (45 CU/inch) 2005 or later, (due to the single pin double pin engine crank issue. Earlier bikes single pin and vibrate.). A 750 for the plus 50mpg.

However, I just found on line in Baltimore a Shadow Aero 1100 2001 which is when they began the dual pin crankshaft in the 1100 model. With a 4.4 gallon tank slightly smaller than the 4.6 gallon tank I currently have.The listing is for 3500$


Suzuki Boulevard C50 (800 cc) in the 2000’s.

I started this post almost 20 days ago it’s now March 20, 2012. I looked at the shadow 1100 in Baltimore. It’s supposed to have an inch more seat height. Although, I didn’t take it out on the road it didn’t seem all that more comfortable.

I’ve kind of been living on Craigs in the search for bikes. There are a couple of considerations here. First, Kari has expressed interest in learning how to ride and she likes my bike, the Sabre. However, I think it might be a little heavy for her. This leads me to the 750-800 class. From what I’ve been able to find they get around 50 mpg. This would be a lighter bike for her to learn on and it would be a bike I could use for extended range trips.

Of course if I could find a cheap Beemer or Concourse 1000 these would provide me with the “extended legs” I’m looking for.